UMaT Courses and Cut off Points

UMaT Courses and Cut off Points

Surf and Find out the University of Mines and Technology (UMaT), Tarkwa admission courses/programmes and their cut off points as well as entry requirements. Applicants are encouraged to read through UMaT courses and cut off points before Applying via the UMaT Admission Portal.

About UMaT Admission

The University of Mines and Technology – UMaT admits applicants from all races and nationalities, irrespective of their religious, cultural, social or ethnic persuasions. There is no minimum age limit for admission to any of the approved programmes of study of the University.

All candidates with the General Certificate of Education ‘A-Level, West African Senior School Certificate Examination (WASSCE) or Senior Secondary School Certificate Examination (SSSCE) usually take 8 semesters (4 years) duration to complete the programme.

UMaT Courses and Cut off Points for Ghanaian Applicants


BSC PROGRAMMES


Faculty of Mineral Resources Technology

  1. BSc Geomatic Engineering
  2. BSc Geological Engineering
  3. BSc Minerals Engineering
  4. BSc Mining Engineering
  5. BSc Environmental and Safety Engineering

To qualify for the above programmes, applicants must have at least credits in the following subjects;

  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry

NOTE: Only Geomatic Engineering applicants can substitute Chemistry for Geography

Faculty of Engineering

  1. BSc Mechanical Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Technical Drawing or Metal Work
  1. BSc Electrical and Electronic Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics
  1. BSc Renewable Energy Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics
  1. BSc Computer Science and Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics or ICT or Computer Studies
  1. BSc Mathematics
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics or Technical Drawing or Metal Work or Geography.

Apply Now: UMaT Admission

School of Petroleum Studies

  1. BSc Petroleum Engineering
  2. BSc Natural Gas Engineering
  3. BSc Petroleum Geoscience and Engineering
  4. BSc Petroleum Refining and Petrochemical Engineering

To qualify for the above programmes, applicants must have at least credits in the following subjects;

  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry

School of Railways and Infrastructure Development

  1. BSc Geomatic Engineering

Applicants must have at least credits in the following subjects;

  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Geograph
  1. BSc Geological Engineering

Applicants must have at least credits in the following subjects;

  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry

3. BSc Environmental and Safety Engineering

Applicants must have at least credits in the following subjects;

  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry
  1. BSc Mechanical Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Technical Drawing or Metal Work
  1. BSc Electrical and Electronic Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics
  1. BSc Computer Science and Engineering
    Applicants must have at least credits in the following subjects;
  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics or ICT or Computer Studies
  1. BSc Mathematics

Applicants must have at least credits in the following subjects;

  • Core: English Language, Mathematics and Integrated Science/Core Science
  • Elective: Physics, Mathematics, Chemistry or Applied Electricity or Applied Electronics or Technical Drawing or Metal Work or Geography

University of Mines and Technology (UMaT) Admission Forms

Grade Aggregate System for WASSCE and SSSCE Holders

UMaT uses the WASSCE Grading Systems for the selection of candidates. Aggregate 36 is the minimum entry aggregate into all programmes. The following table shows this Grading System and the SSSCE equivalent grades.

Applicants with WASSCE/SSSCE

WASSCESSSCEGRADEINTERPRETATION OF GRADES
A1A1Excellent
B2B2Very Good
B3C3Good
C4D4Credit
C55Credit
C66Credit

Applicants with Ordinary and Advanced Level Certificates

Applicants must have a GCE Ordinary Level Certificate or its equivalent with credits in five subjects including English Language, Mathematics, Physics and Chemistry, and GCE Advanced Level Certificate with passes in Mathematics, Physics and Chemistry.

Diploma Programme

Diploma Programme in General Drilling

This is a two year (4-semester) programme run by the Department of Geological Engineering. The programme aims at addressing the needs of middle-level personnel in drilling for mineral/oil exploration, geotechnical and hydrogeological establishments. The successful candidate should be competent to take up jobs in the mining, oil, hydrogeological and allied industries and be able to design, operate, work in a team and supervise drilling operations under all conditions as well as have knowledge in using modern drilling equipment.

UMaT applicants must satisfy any of the Cut off Points

  1. SSCE Holders: Six Passes (A-D) in all subjects which are English Language, Mathematics, Integrated Science, Physics, Elective Mathematics, Chemistry or Metal Work or Technical Drawing or Applied Electricity or Applied Electronics.
  2. WASSCE Holders: Passes (A1-D7) in English Language, Mathematics, and Integrated Science.
    Must possess a minimum of C6 in the following subjects: Physics, Elective Mathematics, Chemistry or Metal Work or Technical Drawing or Applied Electricity or Applied Electronics.
  3. General Certificate of Education (GCE) Ordinary Level credits in five (5) subjects including English language, Chemistry, Physics, Mathematics; and General Certificate of Education (GCE) Advanced Level passes in Chemistry, Physics, and Mathematics.
  4. GCE Ordinary Level Certificate with credits or SSCE with Passes in five subjects including English Language and Mathematics plus experience in the relevant area of study.
  5. City and Guilds of London Institute Part III Certificate or its equivalent in either Mechanical, Automobile, or Electrical Engineering.
  6. Holders of Certificate of Proficiency in General Drilling (one year course) from the University of Mines and Technology, Tarkwa or a recognised institution are eligible.

Certificate Programmes

Here is the certificate courses/programmes available at UmaT

  • Scale Mine and Quarry Administration
  • Survey and Mapping
  • Drone Operations and Application
  • Water Resources
  • Geological Assistantship
  • Small Scale Mine and Quarrying
  • Surface and Underground Mining
  • Minerals Technology
  • Environmental Studies
  • Occupational Health and Safety
  • Oil Well Cementing Technology
  • Natural Gas Technology
  • Drilling Fluids Technology
  • Reservoir Management
  • Geotechnical Technology
  • French (Evening)

UMaT Cut off Points and Entry requirements:

  1. Applicants with SSS Certificates

Candidates must have five passes (A-E) in all subjects including English Language, Mathematics and Integrated Science.

  1. Applicants with WASS Certificate

Candidates must have five passes (A-E8) in all subjects including English Language, Mathematics and Integrated Science.

  1. Applicants with Ordinary and Advanced Level Certificates

Candidates must have FIVE passes in all subjects of GCE O Level including English Language, Mathematics and Science.

  1. Other Applicants

Candidates should be at least 20 years of age and should have any of the following: Diploma in Business Studies (DBS), Middle School Leaving Certificate (MSLC), National Vocational and Technical Institute (NVTI) Certificate, Technician Part I or II Certificate, Basic Education Certificate (BEC) or it’s equivalent. In addition, the candidate must pass an interview conducted at the Department.

NOTE: These are weekend (Saturday and Sunday) programmes.

Mature Applicants

Applicants should be at least 25 years of age and should have an SSS or GCE ‘O’ Level Certificate with credits in Five (5) subjects including English Language, Mathematics and the relevant Science subjects plus experience in the relevant area of study in addition to passing an Entrance Examination and/ or an interview. Mature applicants must also possess birth certificates that are, at least, five (5) years old after the date of issue.

Fee-Paying Applicants

Applicants who satisfy UMaT’s minimum entry requirement of aggregate 36 but cannot meet the competitive departmental cut-off aggregate can apply for admission as Fee-Paying students provided they have sponsorship to cover their fees throughout their study at UMaT. All fee-paying applicants must select the “Fee-Paying” option on their Application Forms.

International Applicants

International applicants from accredited/recognised institutions with equivalent qualifications will be considered for admission.

Entry Requirements for All Programmes

BSc and Diploma Programmes

Generally, International candidates must have at least credits in English, Mathematics, Physics, Chemistry and two (2) other relevant subjects.

Visit https://admissions.umat.edu.gh/international-applicants/undergraduate-code-request.html for more details.

GCE /IGCSE O’Level and A’Level

Applicants under this category must have credits in the following O’Level and A’Level subjects:

  1. O’Level – Five (5) credits including English Language, Mathematics and three other relevant subjects
  2. A’Level – Credits in the following subjects: Physics, Chemistry and Mathematics.

International Baccalaureate

Applicants with international Baccalaureate (Science and Technical) are eligible to apply. Such applicants must also possess a proficiency certificate in English. Please note that all certificates should be translated into English. Equivalences concerning the certificates would be sought at the National Accreditation Board.

Certificate Programme In English

The Certificate Programme in English is a two-semester programme aimed at providing knowledge in English for Foreign applicants with the English Language skills necessary to follow a university-level course with English as the medium of instruction.

There are two (2) admissions for this programme. 

  1. First Admission – Classes start in September and end in May.
  2. Second Admission – Classes start in January and end in May (Intensive).

Candidates who pass the UMaT Certificate Programme in English will be eligible to apply for admission into the UMaT Diploma and Degree programmes.